Details: Error Code 1
The error codes below shall be used when providing error responses to the following commands:
Get_Record
Set_Record
Get_IM_Record
Set_IM_Record
High nibble (bits 4... 7) | Low nibble (bits 0... 3) | ||
|---|---|---|---|
ErrorClass | Meaning | ErrorCode | Meaning |
0... 9 | Reserved | (reserved) | (reserved) |
10 | Application | 0 | Read error |
1 | Write error | ||
2 | Module error | ||
3... 6 | (reserved) | ||
7 | Busy | ||
8 | Version conflict | ||
9 | Feature not supported | ||
10... 15 | User specific | ||
11 | Access | 0 | Invalid index |
1 | Write length error | ||
2 | Invalid slot/subslot | ||
3 | Type conflict | ||
4 | Invalid area | ||
5 | State conflict | ||
6 | Access denied | ||
7 | Invalid range | ||
8 | Invalid parameter | ||
9 | Invalid type | ||
10 | Backup | ||
11... 15 | User specific | ||
12 | Resource | 0 | Read constrain conflict |
1 | Write constrain conflict | ||
2 | Resource busy | ||
3 | Resource unavailable | ||
4... 7 | (reserved) | ||
8... 15 | User specific | ||
13... 15 | User specific | (user specific) | User specific |
See also...