Command Details: AR_Abort_Ind
Category
Extended
Details
Command Code: | 19h |
Valid for: | Object Instance |
Description
This command is optional. The module issues this command to indicate to the host application that an Application Relationship (AR) is aborted (by the application or any other source).
Command Details
Field
Contents
Comments
CmdExt[0]
AR handle (low byte)
Handle for the Application Relationship (AR)
CmdExt[1]
AR handle (high byte)
MsgData[0]
Reason code (low byte)
Reason code for the offline transition
Value:
Reason:
0
No reason (unknown reason)
3
Out of memory
4
Add provider or consumer failed
5
Miss (consumer)
6
Cmi timeout
7
Alarm-open failed
8
Alarm-send.cnf(-)
9
Alarm-ack-send.cnf(-)
10
Alarm-data too long
11
Alarm.ind(err)
12
Rpc-client call.cnf(-)
13
Ar-abort.req
14
Re-run aborts existing
15
Got release.ind
16
Device passivated
17
18
Protocol violation
19
NARE error
20
RPC-Bind error
21
RPC-Connect error
22
RPC-Read error
23
RPC-Write error
24
RPC-Control error
25
Forbidden pull or plug after check.rsp and before in-data.ind
26
AP removed
27
Link down
28
Could not register multicast-mac
29
Not synchronized (cannot start companion-ar)
30
Wrong topology (cannot start companion-ar)
31
Dcp, station-name changed
32
Dcp, reset to factory-settings
33
Cannot start companion AR because of parameter error
MsgData[1]
Reason code (high byte)
Response Details
(no data)