Instance Attributes (Instance #20, QuickConnect)
This instance enables or disables the QuickConnect functionality from the application. Changes are valid after reset or power cycle. The value of the QuickConnect attribute (#12) in the TCP/IP Interface object (F5h), will change immediately.
This instance has no effect unless QuickConnect is enabled in the EtherNet/IP host object. If QuickConnect is disabled in the EtherNet/IP host object the application is advised to hide this instance to the end-user.
See also...
# | Name | Access | Data Type | Description | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
1 | Name | Get | Array of CHAR | “QuickConnect” | ||||||
2 | Data type | Get | UINT8 | 08h (= ENUM) | ||||||
3 | Number of elements | Get | UINT8 | 01h (one element) | ||||||
4 | Descriptor | Get | UINT8 | bit 0: 1 = Read access bit 1: 1 = Write access bit 2: 1 = Shared access | ||||||
5 | Value | Get/Set | ENUM | If read, the actual value will be received. If written, the written value is reflected in attribute #6 until a reset.
| ||||||
6 | Configured Value | Get | ENUM | Holds the configured value, which will be written to attribute #5 after the module has been reset.
|